The editor held the whole note in memory and stopped at 16 KB. It now keeps
a window of the file around the cursor, and the rest on the card as a list
of pieces (notes::NoteDocument). Memory with a note open is what it was.
Up to 64 KB a save rewrites the file, as before. Above, the five-second
save appends what changed to <note>.edit, and the file is rewritten on
leaving the note, with a progress bar. After a power cut, opening the note
picks the edit up where it was saved; a rewrite cut short is finished or
dropped, never half applied.
Also: Ctrl with Fn+Up/Down go to the start and end of the note; the
consoles' `key` command takes ctrl-, alt- and shift-; the Storage App's
`e` no longer refuses a big file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The Site workflow's last step, and the release workflow after publishing,
ask the web server over SSH to rebuild the site. The key CI holds is tied
on the server to one forced command (restrict,command=...), so CI sends no
command and a leaked key can only refresh the site. The server, the user,
the key and the server's host key are Gitea secrets; with none of them set
the step does nothing.
scripts/site_refresh.sh is what both workflows run;
scripts/site_deploy_keygen.sh makes the key and prints where each half goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Tab used to complete a command's first word only. It now follows the help
text word by word: `lora st` gives `lora status`, `gnss track ` lists
`start stop`. The words are read from the help text as written, so a new
command completes with no table to keep; the Shell's own words are added in
the same notation.
`*` and `?` in the last part of a path, for ls, du, rm, cp and mv, from the
Shell and both consoles. The command runs once for each name matched, lined
up and run by the main loop as each finishes; `cancel` empties the line-up.
64 matches at most, refused whole past that. In the Shell, rm with a pattern
asks once, with the count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Past the command's name, Tab completes the word being typed as a path: a
folder keeps its slash to go on from, a file completed whole gets a space,
several candidates are listed. Any case typed, the name's own is taken.
After a file command the first slash is understood (`cat no` is /no).
The folder is read on the storage task, bounded to 400 entries looked at
and 24 candidates.
489 host tests (2 new). Checked on the device: a folder, a file inside it,
several candidates, no slash, another case, nothing matching.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The Shell shows the replies to its own commands and nothing else. The
console knows who each line is printed for (Console::As, Console::origin):
a command run from the Shell prints as the Shell's, and what answers it
later from another task carries that along (ls, tasks, du, cp, update
check, sd list, screenshot, gemini get). Ctrl+b shows everything instead.
This replaces the ten-second window, which was a guess.
An App's name with a capital opens it (Notes, Irc, Wifi, Gnss, Gemini, Lora,
Storage, Shell, System, Settings), from the Shell and from the consoles.
rm needs -r for a folder, here and over the consoles. In the Shell a file,
or a folder with something in it, is asked about unless -f; an empty folder
with -r goes without a word.
The Shell now hands its line to the main loop to run: run from inside the
key handler, rm on a folder overflowed the loop's stack and crashed the
device. `info` says which App is in front.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
An App in the Launcher that runs the same commands as USB serial and the
Debug Console, trusted like the first. It shows what the console prints
while it is open, through a second ring of the console's that exists only
meanwhile; Ctrl+b keeps only what follows your own commands. Tab completes
a command's name from the firmware's help text, Fn with up and down recalls
earlier lines, Alt with up and down scrolls back. `rm` asks first in the
Shell, `rm -f` doesn't. Nothing is kept once the App is left.
`screenshot [seconds]` saves the screen as a PNG in /screenshots on the
card, now or after a pause: written a row at a time, indexed colour with
RGB332 as the palette, in one stored deflate block.
487 host tests (11 new: the PNG writer, the Shell's log filter, Tab).
Checked on the device over the Debug Console: commands, Tab, history, a
screenshot fetched and decoded on the PC, rm with and without the question,
a delayed screenshot of another screen. 12 KB of flash; 7 KB of heap while
open. Decisions Q204 to Q212 in docs/milestones/S1.md. Safe Mode: #77.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
A pull request's firmware step took 358 s: 260 of them rebuilding the
framework that was already in the volume, because the platform decides by
sdkconfig.defaults in the project folder, which is generated and not in git,
so no fresh checkout had it. It is now kept in the volume, inside the
libraries it describes, and copied into the checkout; the platform still
checks its hash against platformio.ini.
The version was a -D on every command line: each commit recompiled
everything, and no cache could help. scripts/version.py now writes one
generated header, read by one file.
PlatformIO's build cache in the volume for pull requests' firmware, ccache
for the host tests (built for coverage, which the build cache can't keep),
the tools in a venv in the volume, and a tag builds its firmware once.
A release still compiles its own sources from nothing.
Measured on fresh copies of the tree: the firmware step 358 s to 27 s (a new
version and one changed file), tests and coverage 49 s to 33 s, a local
rebuild with nothing changed 77 s to 13 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Every screen's keys are constant tables in lib/core/src/app_keys.h (52 of
them, each under an `// id: Title` comment). An App's help() picks the table
of the state it is in. site/tools/gen_dev_docs.py reads the same file and
writes site/data/keys.toml; the `keys` shortcode shows a screen's tables on
its guide page, and /guide/keys/ shows all of them.
The Site job fails when the data file is out of date or a page asks for a
table that doesn't exist, and now also runs when app_keys.h changes. A key
added to an App shows up on the website without anyone editing a page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Fn+h on any screen, text fields included, and ? outside Text Entry, open a
panel over the content area: the screen's own keys, then the ones that work
everywhere. Every App declares its keys for the state it is in (pages,
viewers, dialogs and text fields answer for themselves); the App manager
opens the panel and takes every key while it is open.
About 30 hint lines are gone, from every App. What stays on a screen is
state. The first-start Setup keeps its hints and teaches the key; a device
set up before gets one Toast, once. The guide and the FAQ open with it.
`key help` over the consoles.
476 host tests (8 new). Checked on the device with key help and screenshots:
the Launcher, all nine Apps and several of their states. 8.5 KB of flash and
40 bytes of static RAM. Decisions Q196 to Q203 in docs/milestones/U1.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The framework's server begin() fails without a word: the console's task now
asks whether it listens, says so, and tries again. `debug off <seconds>`
closes the console and reopens it after the pause, which is the only way to
test its closing and reopening from afar.
Checked on the device: 25 closings and reopenings, each back a second after
the pause. Free heap dips about 270 bytes for each connection the device
closes and is all back two minutes later (TCP keeps a closed connection that
long): not a leak.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
There is no Debug Build any more (ADR 0010, issue #68, Q188 to Q195). The
console and the test commands are compiled into every firmware. It listens
only while Settings > Debug Console is on, which isn't the default; off,
neither its task nor its 4 KB ring exists. The token is made by the device
and shown on that page; a client proves it knows it by answering a challenge
with an HMAC, so it never crosses the network, and five wrong answers close
the console for a minute. DBG in the Status Bar while it listens.
Over USB serial only: debug on, debug token <value>, debug token new.
scripts/flash.sh --debug uses them to set a device up with the developer's
token. scripts/rdbg.py takes the token from -t, $RORO_DEBUG_TOKEN or the
file, answers the challenge, and fetches a release's ELF to decode a crash.
Gone: the cardputer-adv-debug environment, RORO_DEBUG, the +debug version,
scripts/debug_flags.py, update install ... force, and the rule that a Debug
Build doesn't install releases. Old clients and old firmwares don't talk to
each other.
Against the builds it replaces: 30 KB more flash and 88 bytes more static
RAM than the release, 4 KB less RAM than the Debug Build. 468 host tests.
Checked on the device: off by default, login, the pause after wrong tokens,
Safe Mode with the console, the setting surviving an update, debug off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
/dev/ has Debug Builds and the Debug Console (builds and the token, the
console and its protocol, files and screenshots, driving the UI, crashes and
Safe Mode, the command reference), Build, test and release (including how an
update works), the architecture decisions and the milestone plans.
Generated from the repository by site/tools/gen_dev_docs.py: the ADRs, the
milestones, the README's sections, and the command reference, read from the
firmware's own `help` text. The pages are committed (Zola cannot read outside
its folder); the Site workflow checks they are current, and now also runs
when src/main.cpp changes. M0, M1 and CONTEXT.md are not published.
README: the gnss commands that the table lacked.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Eight how-to recipes and a FAQ page with a list of its questions, from the
README, the milestone documents and the Apps' source. The guide templates
become generic (the parent section gives the eyebrow, title and pager).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
"The last post" and "the first post" in the LoRa, Gemini and S1 posts are
now links. check_site.py follows every link to another page of the site and
the #fragment it names, so a broken one fails the Site job.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Seven posts imported into site/content/devlog/ with their text unchanged,
links between them pointing to /devlog/, and shortcodes (sign, cast, steps,
asides, folded sections, diagrams, captions) restyled in the site's palette.
The 17 inline SVG diagrams carried <style> blocks and style attributes the
site's Content-Security-Policy refuses: their rules moved to
devlog-diagrams.css, and a diagram's minimum width is a class. An Atom feed
at /devlog/atom.xml.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Eleven pages under /guide/, written from the README, the milestone documents
and the Apps' own source: the keys, the Launcher, the Status Bar and the first
start; the LoRa Scanner, GNSS, Gemini, IRC, Wi-Fi tools, Notes, Storage and
System; Settings (with Wi-Fi) and Updates. Real screenshots where the site has
them, a Guide link in the navigation, and the home page points to it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
security.txt (RFC 9116) under .well-known with the mailbox as contact and an
expiry in September 2027. robots.txt allows everything and points to the
sitemap. The pixel 9 gets a favicon.ico (32 and 48 px) and an
apple-touch-icon.png, drawn by tools/make_favicons.py from the same
rectangles as favicon.svg.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
A Zola site in site/, from the design: both themes on the device's
palette, notched shapes, self-hosted fonts, the wordmark and icons, two
generated hero drawings, nine App cards (the mesh messenger marked
planned), real screenshots, the updates and build sections. The Install
page builds ESP Web Tools' manifest in the browser from the Gitea API (it
needs Caddy to allow the origin), refuses any download that isn't on the
project's server, and falls back to the esptool steps. Downloads lists the
releases. The focus ring shows on notched controls. A page checker fails
the build if a page loads from another origin.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
site.yml builds the site with a Zola pinned by its checksum and checks the
pages when site/, docs/, README.md or CONTEXT.md change. ci.yml gets
paths-ignore for the same files on pushes to main and on pull requests; a
tag always runs it (Gitea doesn't apply path filters to tags). A change
touching both runs both.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
A branch with an open pull request ran twice per push: once for the push,
once for the pull request. Pushes to main still run the tests and publish
the badges; every other branch is tested by its pull request.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The announcement was cut at the notification's 48 bytes; it now reads
"v0.11.0 is out: see Settings > Firmware". README: Updates from Gitea
and its limits. ADR 0009: the device trusts the two ISRG roots. R1.md:
what was built and the checks on the device, with what wasn't checked.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Latest release (checked on Enter, or c), Older releases (the last ten,
newest first), a release page with the tag's message, and an install
dialog; going back to an older release asks differently. A failed check
someone asked for shows a Toast. A Debug Build shows the latest release
and says it can't install it: it would take its console away.
Tried on the device: a check, the list, the release page, the dialog
(Cancel is the default; Back cancels), and the install from the screen
with its progress screen, then the restart into the release build and its
confirmation.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
A release downloads straight into the inactive slot through the existing
install path: the signature is checked after 160 bytes, before anything
is written, the hash at the end. Tried on the device against the real
server: a download cut short, a flipped byte in the signature and one in
the image are each refused with the running firmware untouched; the real
v0.10.0 installed, restarted, and confirmed itself on Probation.
A TLS connection to Gitea peaks at about 52 KB of heap whether or not the
certificate is verified. With IRC connected (66 KB free) a check left 3 KB
and a download 836 bytes. A check, list or install a person asks for now
makes IRC step aside (holdForUpdate) and come back after: the lowest free
heap during a full download with IRC connected is 38 KB. The daily check
never interrupts IRC; with IRC up it waits. A TLS connection starts with
80 KB free (it was 55).
Debug Builds get test knobs: update probe <host>, update damage cut|flip,
update pretend <version>.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The roots (ISRG X1 and X2), an HTTPS client that reads the answer as a
stream, GiteaReleases (the latest and a list of ten), the Update
Service's requests, install from Gitea through the existing install path,
the daily check's schedule, the Check for updates setting, and console
commands: update check | list | status | install <tag>.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twisla
