The Notes App lists the files of /notes by their first line, newest first:
n starts a note, Enter opens it, r renames its file, d deletes it after
asking, s sorts by name. A new note's file is named after its first line.
The editor wraps at spaces, 38 columns by 8 rows; Fn+arrows move through
the wrapped text, Ctrl+A and Ctrl+E go to the ends of the line. There is no
save key: the note is written five seconds after the last key, on Back, on
leaving the App, when the screen turns off and before the device powers
off. A save writes a temporary file and puts it in the note's place; a save
cut short is put back, or offered, the next time.
A note is up to 16 KB, held in one buffer reserved when it's opened: the
file is read straight into it and typing never makes it grow. A failed
allocation aborts on this device, and with IRC connected the largest free
block is about 31 KB: a first version that copied the note once on loading
restarted the device when a full note was opened with IRC connected.
Editing files of any size is #47.
The Storage App's text viewer gets `e`, which edits a text file up to 16 KB
with the same editor unless the file is read-only.
439 host tests. Checked on the device: docs/milestones/F1.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The Storage App browses the SD card: folders first with sizes and dates,
three sorts, one item at a time with a clipboard (c, x, v), rename, delete
after counting what's inside, new folder, details. A listing holds 256
entries and says when a folder has more.
FileOps does the card's work for the App and the console alike, one
operation at a time on the storage task in turns of about 150 ms, so Logs
and Captures are still written during a long copy. A copy shows progress,
can be cancelled (what it wrote is taken back) and compares sizes after.
The read-only rules are checked there: the firmware's top-level folders,
/gemini/cache, and files being written (a Track, a Capture, an upload,
today's IRC Logs). A listing reads the folder straight from FatFs: through
the Arduino File, 329 entries took over two seconds.
Viewers by type: text read a screen at a time whatever the file's size
(logs open at the end), a hex dump, a Capture's packets as the LoRa Scanner
lists them, a Track's summary, and an Update File checked as an install
would check it, without writing anything. Tab shows any file as hex or text.
Settings > Storage is gone: usage, Storage Clean-up and Erase are the App's
Maintenance, behind a warning. The Storage Warning points there.
The Clock sets the system time whatever its source, so files are dated
correctly with a GNSS Fix alone (Q137).
Console: cp, mv, mkdir, du, cancel; rm takes folders and follows the rules;
ls shows dates; Debug Builds get `sd fill`.
424 host tests. Checked on the device: docs/milestones/F1.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Enter on a Saved Network opens its page instead of asking to forget it:
"IP address" switches between Automatic and Fixed, with an address, a
prefix and an optional gateway. Fixed starts from what the network is
giving the device; the draft is checked and applied on leaving the page,
so a half-typed address is never used. "DNS and NTP" holds the two DNS
servers, "Always use my DNS" and the two NTP servers. Enter on Status
shows the connection's details and where each value came from. Address
fields take digits and dots only; refusals show as Toasts.
Checked on the device through the screens: Fixed 10.39.39.13 applied and
reverted to Automatic, a prefix of 99 refused. Measurements in
docs/milestones/S1.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The Radio Service owns the SX1262 and shares the SPI bus with the card;
the LoRa Scanner shows packets (Sniffer) and the band (Sweep). Nothing in
M3 can transmit. Notes and the File Browser move to issues #19 and #3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
IrcService::disconnect() stops the session from any state: QUIT if
connected, then no more retries. /quit goes through it (before, it only
stopped a connected session; while waiting for Wi-Fi or retrying it did
nothing), and so does the new `irc stop` command. Stopped by hand,
opening the IRC App no longer reconnects; typing a line does.
mDNS is gone: it never crossed the dev box's routed network, and it
cost about 7.5 KB of RAM. Pushes go to the IP shown in Settings ->
Firmware, which drops its Name row. OTA Q54 records the change.
On the device, Debug Build: 105.6 KB free with Wi-Fi (was 98); with IRC
on TLS 54 KB free (was 46); after `irc stop`, back to 99 KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Every build now records at boot which version runs and, after a crash
restart, which one crashed (even across a Rollback). The core dump
summary (task, PC, reason, backtrace) is printed and raised as a
Notification; `crash` shows it later. After 3 crash restarts in a row
the firmware starts in Safe Mode: clock, Wi-Fi, Update Service and Debug
Console only (SafeMode, 2 host tests). A normal restart or a minute up
resets the count.
The main loop is now on the task watchdog (enableLoopWDT): Arduino only
watched core 0's idle task, so a stuck loop hung the device for good.
The Update Service restarts into an installed update by itself if the
main loop hasn't after 90 s.
Debug Builds: `coredump get` and `reset` are answered by the console's
own task; rdbg.py crash decodes the backtrace and rdbg.py coredump runs
esp-coredump, against ELFs archived by version and digest in .pio/elves.
The StorageService mutex is now made in the constructor: Safe Mode never
starts that Service, and `info` crashed on the null mutex, 29 times in a
row before the fix was pushed into Safe Mode over Wi-Fi.
Verified on the device: crash report and full core dump decoded over
Wi-Fi; Safe Mode at exactly 3 crashes, left by `reboot`; a hung loop
caught by the watchdog in 5 s; `reset` from the console task. ADR 0005.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
cardputer-adv-debug (-DRORO_DEBUG, version +debug) adds a Debug Console:
after a token line, a client gets the last 6 KB of console output, live
lines (ESP-IDF logs included) and the serial commands. The socket task
only queues lines; the main loop runs them. Release builds compile none
of it. The token lives in ~/.config/roro9stack/debug-token, created by
_docker.sh and passed into the container.
All output now goes through `console`, which never waits for USB: a host
that was attached but not reading stalled the main loop up to 2 s per
line. New commands everywhere: info (slots with their versions from NVS,
since the framework stamps its own into each image), tasks, reboot,
boot other, log level, help. scripts/rdbg.py is the client; flash.sh
--debug builds it; CI builds both variants. ADR 0004.
Verified on the device: USB-flashed, then updated over Wi-Fi to a Debug
Build that confirmed on Probation; both slots hold Debug Builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/wifi (host-tested): scan_log (CSV field quoting, header/row, a
once-per-interval throttle) and network_list_view (sort by signal /
channel / name, filter open-only / hide-hidden / strong-only)
- ScanEntry moved to lib/wifi so both are testable on the PC
- Wi-Fi Tools networks view: s sort, o/h/w filters, l toggles logging
to /wifi/scans/<date>.csv (header + one row per AP per logged scan,
throttled 30 s, needs the clock for timestamps); foreground-only
- Wi-Fi scan logs replace probe-request logs as a clean-up category
- Serial: cat <path>, and key <char> injects a character
Verified on the device: CSV written with header, timestamps, BSSID,
channel, RSSI, security and SSID; hidden networks marked.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
CONTEXT.md captures the roro9stack domain language (Apps, Services,
Mesh Service, Nodes, Channels, Storage rules). ADR 0001 records building
our own firmware that speaks Meshtastic instead of forking it; ADR 0002
records an own widget kit on M5GFX instead of LVGL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
twislaandClaude Opus 5.5