twislaandClaude Opus 5.5
987406fa7c
lib/services holds the host-tested logic: - Settings: typed, validated, persisted, SettingChanged events, transmit gated on a confirmed Region - BatteryEstimator: LiPo curve, median smoothing against TX sags - ClockModel: source priority GNSS > NTP > mesh, relative ages, Europe/Brussels local time via POSIX TZ - StorageMonitor: warning once per boot at 80%, Logs stop at 90%, Captures stop with < 2 MiB left - PowerPolicy / PowerButton: dim/off timeouts, wake key swallowed only when the screen was off, G0 long press src/services wires them to the hardware (NVS, battery ADC, SD on the shared SPI bus with the LoRa CS held high, backlight, deep sleep), and main.cpp is a temporary diagnostics screen for the hardware checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
roro9stack
A multi-app firmware for the M5Stack Cardputer ADV with the Cap LoRa-1262. It's a Meshtastic-compatible mesh messenger, plus Wi-Fi tools, IRC, GNSS and more. Licensed GPL-3.0.
- Domain language: CONTEXT.md
- Decisions: docs/adr/
- Milestones: docs/milestones/
Requirements
Only Docker is needed. PlatformIO and the ESP32 toolchain run inside a container, and are cached in the roro9stack-pio Docker volume. The first build downloads about 1 GB and takes a few minutes.
Build and test (local CI)
scripts/ci.sh
This runs the host-side unit tests (test/, native environment), then builds the firmware. The output is .pio/build/cardputer-adv/firmware.factory.bin.
Flash
-
Connect the Cardputer by USB-C.
-
Run:
scripts/flash.sh # auto-detects the port; or: scripts/flash.sh /dev/ttyACM1This uploads the firmware, then opens the serial monitor. Quit the monitor with
Ctrl+C.
If the upload can't connect, put the device in download mode: hold G0 (the button next to the screen) while plugging in USB, or while pressing reset. Then retry.
If you get "permission denied" on the port, your user needs access to the serial device. Run this once, then log out and back in:
sudo usermod -aG dialout "$USER"