twislaandClaude Opus 5.5
879cb0d0b6
Steps 5 and 6 of M0. - lib/ui (host-tested): ListModel, LineEditor (UTF-8, byte-limited), wrapText, ToastQueue, DialogModel - lib/input (host-tested): KeyMapper turns keyboard state into logical keys (Fn arrows, ` Back, Fn+` Home) and composes accents with opt - src/ui: off-screen 16-bit frame pushed in one transfer (fixes the flicker), Status Bar, list, text, line editor, dialog, Toast widgets, Notifier (Toast + beep + LED), vendored public-domain Latin-1 fonts - Apps: minimal Launcher, Widget demo, Diagnostics (SD erase now behind a confirmation dialog) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
roro9stack
A multi-app firmware for the M5Stack Cardputer ADV with the Cap LoRa-1262. It's a Meshtastic-compatible mesh messenger, plus Wi-Fi tools, IRC, GNSS and more. Licensed GPL-3.0.
- Domain language: CONTEXT.md
- Decisions: docs/adr/
- Milestones: docs/milestones/
Requirements
Only Docker is needed. PlatformIO and the ESP32 toolchain run inside a container, and are cached in the roro9stack-pio Docker volume. The first build downloads about 1 GB and takes a few minutes.
Build and test (local CI)
scripts/ci.sh
This runs the host-side unit tests (test/, native environment), then builds the firmware. The output is .pio/build/cardputer-adv/firmware.factory.bin.
Flash
-
Connect the Cardputer by USB-C.
-
Run:
scripts/flash.sh # auto-detects the port; or: scripts/flash.sh /dev/ttyACM1This uploads the firmware, then opens the serial monitor. Quit the monitor with
Ctrl+C.
If the upload can't connect, put the device in download mode: hold G0 (the button next to the screen) while plugging in USB, or while pressing reset. Then retry.
If you get "permission denied" on the port, your user needs access to the serial device. Run this once, then log out and back in:
sudo usermod -aG dialout "$USER"