Public Access
- lib/wifi (host-tested): channel occupancy (neighbour spill, signal weighting, quietest of 1/6/11) and a signal tracker (history, lost detection, click interval) - WifiService: scan results carry BSSID, channel and security; a scan can target one channel for quick tracker refreshes; endListScans() turns the radio back off when Wi-Fi is disabled - Wi-Fi Tools App: networks nearby, channel occupancy bars, signal tracker with clicks (m to mute) - M1 plan: Monitoring-mode views and captures deferred Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
54 lines
4.1 KiB
Markdown
54 lines
4.1 KiB
Markdown
# M1 — Wi-Fi Service, Wi-Fi Tools, IRC
|
|
|
|
**Goal:** the device joins your Wi-Fi by itself, syncs its clock, keeps an IRC session alive in the background, and gives passive Wi-Fi diagnostics with full-frame captures.
|
|
|
|
## Decisions (design round 2026-10-02)
|
|
|
|
| # | Decision |
|
|
|---|---|
|
|
| Q40 | Up to 8 **Saved Networks**, joined strongest-first. Added from a scan or as a hidden network. Open networks are allowed; enterprise (802.1X) is not. |
|
|
| Q41 / Q48 | The Wi-Fi Service stays **Connected** whenever enabled and a Saved Network is in range. Settings has a Wi-Fi On/Off switch. **Monitoring** happens only while Wi-Fi Tools is open; the device reconnects on exit. |
|
|
| Q42 | *Revised 2026-10-02:* Wi-Fi Tools is built from ordinary scans only (access points, channel occupancy, signal tracker). Monitoring-mode views and captures are deferred, to be revisited later. |
|
|
| Q43 | The signal tracker clicks faster as the signal gets stronger. On by default, mutable. |
|
|
| Q44 | IRC shows one Buffer at a time; Tab cycles Buffers. Commands: `/join /part /msg /me /nick /topic /names /quit /raw`. Logs go to `/irc/<network>/<buffer>/YYYY-MM-DD.log`. |
|
|
| Q45 | TLS verifies server certificates against the bundled certificate authorities. Per server, a self-signed certificate can be pinned on first use. |
|
|
| Q46 | If RAM is short: switch the frame buffer to 8-bit colour. Keep the AtomS3 Wi-Fi co-processor in mind. |
|
|
| Q47 | Passwords are stored in NVS without flash encryption (revisit before any public release). |
|
|
| IRC | The **IRC Service** stays connected in the background once the App has started it, until `/quit` or disconnect. It does not start at boot. |
|
|
| Q49 | Opening a Monitoring view while IRC is connected asks first. IRC then pauses, and reconnects and rejoins afterwards; its Buffers show the gap. |
|
|
| Q50 | Reconnects after drops wait 5 s, 10 s, 30 s … up to 5 min. |
|
|
| Q51 | Mentions and private messages raise Notifications. Other traffic only counts as unread (Status Bar shows the total). |
|
|
| M0 | The **Storage Clean-up** screen lands here, once IRC Logs and Captures exist. |
|
|
|
|
## Done when
|
|
|
|
- Wi-Fi joins the strongest Saved Network at boot. The Status Bar shows Wi-Fi state, and the clock is set over NTP.
|
|
- Settings → Wi-Fi: On/Off, scan and add a network (with password), add a hidden network, forget a network.
|
|
- The IRC App configures one server (host, port, TLS, nick, SASL or NickServ, auto-join IRC channels). It connects and keeps running after you leave the App. Mentions notify.
|
|
- IRC reconnects after Wi-Fi loss or a server drop, and rejoins its IRC channels. Logs are written to the SD card (and stop past 90% usage).
|
|
- Wi-Fi Tools: access-point list, channel occupancy with the quietest of channels 1/6/11, and a signal tracker that clicks faster as the signal gets stronger. None of it interrupts the connection or IRC.
|
|
- Settings → Storage → Clean-up deletes IRC Logs, probe Logs and Wi-Fi Captures older than a chosen age, with a preview of the space freed.
|
|
- Free heap stays above about 40 KB with Wi-Fi, TLS-connected IRC and the UI running.
|
|
|
|
## Work breakdown (proposed order)
|
|
|
|
1. **Memory baseline:** measure the heap with Wi-Fi Connected plus one TLS connection. Switch the frame buffer to 8-bit if the margin is too thin.
|
|
2. **Wi-Fi Service:**
|
|
- Saved Networks in NVS.
|
|
- Choosing the network (host-tested).
|
|
- The Off / Connecting / Connected / Monitoring state machine (host-tested).
|
|
- NTP → Clock.
|
|
- Status Bar indicator.
|
|
- Settings → Wi-Fi pages.
|
|
3. **Log writing:** a Log writer that respects the Storage rules, daily files, and the Storage Clean-up screen (selection logic host-tested).
|
|
4. **IRC Service** (host-tested core):
|
|
- message parser and serializer;
|
|
- registration, SASL PLAIN and NickServ;
|
|
- PING/PONG;
|
|
- Buffers with unread counts and Mention detection;
|
|
- reconnect backoff, and pause/resume around Monitoring.
|
|
|
|
Then the TLS transport with the certificate bundle.
|
|
5. **IRC App:** Buffer view, input line, command parser (host-tested), server settings page.
|
|
6. **Wi-Fi Tools App:** access-point list, channel occupancy and signal tracker from scans (occupancy and tracker logic host-tested). Monitoring mode is deferred.
|