Public Access
twislaandClaude Opus 5.5
d3948ccc3a
- lib/storage_model (host-tested): FAT-safe names, daily Log paths, dates from Log/Capture file names, CleanupPlan by category and age, byte formatting - StorageService does all card I/O on its task: queued Log lines are written in batches each second (dropped while Logs are paused), plus file listing and deletion jobs - Settings > Storage moves into StoragePage: usage, Clean up (category, age with size preview, confirmation), Erase SD card - Clock: local date for Log names - Serial: log <text>, sd list Verified on the device: lines land in /irc/dev/#test/2026-10-02.log with folders created as needed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
56 lines
2.3 KiB
Markdown
56 lines
2.3 KiB
Markdown
# roro9stack
|
|
|
|
A multi-app firmware for the **M5Stack Cardputer ADV** with the **Cap LoRa-1262**. It's a Meshtastic-compatible mesh messenger, plus Wi-Fi tools, IRC, GNSS and more. Licensed GPL-3.0.
|
|
|
|
- Domain language: [CONTEXT.md](CONTEXT.md)
|
|
- Decisions: [docs/adr/](docs/adr/)
|
|
- Milestones: [docs/milestones/](docs/milestones/)
|
|
|
|
## Requirements
|
|
|
|
Only **Docker** is needed. PlatformIO and the ESP32 toolchain run inside a container, and are cached in the `roro9stack-pio` Docker volume. The first build downloads about 1 GB and takes a few minutes.
|
|
|
|
## Build and test (local CI)
|
|
|
|
```sh
|
|
scripts/ci.sh
|
|
```
|
|
|
|
This runs the host-side unit tests (`test/`, `native` environment), then builds the firmware. The output is `.pio/build/cardputer-adv/firmware.factory.bin`.
|
|
|
|
## Flash
|
|
|
|
1. Connect the Cardputer by USB-C.
|
|
2. Run:
|
|
|
|
```sh
|
|
scripts/flash.sh # auto-detects the port; or: scripts/flash.sh /dev/ttyACM1
|
|
```
|
|
|
|
This uploads the firmware, then opens the serial monitor. Quit the monitor with `Ctrl+C`.
|
|
|
|
**If the upload can't connect,** put the device in download mode: hold **G0** (the button next to the screen) while plugging in USB, or while pressing reset. Then retry.
|
|
|
|
**If you get "permission denied" on the port,** your user needs access to the serial device. Run this once, then log out and back in:
|
|
|
|
```sh
|
|
sudo usermod -aG dialout "$USER"
|
|
```
|
|
|
|
## Development aids
|
|
|
|
`scripts/serial_log.sh [seconds] [command…]` records the serial output, and can send commands to the firmware first. For example, `scripts/serial_log.sh 30 short sleep:12 burst` sets short screen timeouts, waits 12 s, then sends a burst of Toasts.
|
|
|
|
| Command | Effect |
|
|
|---|---|
|
|
| `burst` | Publishes 5 Notifications at once |
|
|
| `key up\|down\|left\|right\|select\|back\|home` | Injects a logical key press |
|
|
| `sound on` / `sound off` | Toggles the Sound setting (beep + LED) |
|
|
| `short` / `normal` | Screen timeouts 5 s / 10 s, or 30 s / 60 s |
|
|
| `wifi add <ssid><TAB><password>` | Adds a Saved Network (so credentials stay out of the repo) |
|
|
| `log <text>` | Appends a line to a test IRC Log (`/irc/dev/#test/<date>.log`) |
|
|
| `sd list` | Lists the files of each Storage Clean-up category |
|
|
| `wifi status` | Prints Wi-Fi state, network, signal, clock and free heap |
|
|
|
|
`scripts/flash.sh` stops a running serial log first, since it would hold the port.
|