twislaandClaude Opus 5.5
1f0c1b2e14
- With NickServ, auto-join waits for the logged-in reply (900) or 2 s
at most, so registered-only IRC channels let us in
- A failed SASL login falls back to NickServ (its own password, or the
SASL account and password)
- IDENTIFY names the account explicitly, and once logged in on a
fallback nick, REGAIN takes ours back from a stale session
- Auto-join entries take keys ("#private key, #public"); keys from
/join are reused when rejoining; keyed channels go first in JOIN
- Serial irc dump: whole Buffers, and which login is configured
(never the secrets)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
roro9stack
A multi-app firmware for the M5Stack Cardputer ADV with the Cap LoRa-1262. It's a Meshtastic-compatible mesh messenger, plus Wi-Fi tools, IRC, GNSS and more. Licensed GPL-3.0.
- Domain language: CONTEXT.md
- Decisions: docs/adr/
- Milestones: docs/milestones/
Requirements
Only Docker is needed. PlatformIO and the ESP32 toolchain run inside a container, and are cached in the roro9stack-pio Docker volume. The first build downloads about 1 GB and takes a few minutes.
Build and test (local CI)
scripts/ci.sh
This runs the host-side unit tests (test/, native environment), then builds the firmware. The output is .pio/build/cardputer-adv/firmware.factory.bin.
Flash
-
Connect the Cardputer by USB-C.
-
Run:
scripts/flash.sh # auto-detects the port; or: scripts/flash.sh /dev/ttyACM1This uploads the firmware, then opens the serial monitor. Quit the monitor with
Ctrl+C.
If the upload can't connect, put the device in download mode: hold G0 (the button next to the screen) while plugging in USB, or while pressing reset. Then retry.
If you get "permission denied" on the port, your user needs access to the serial device. Run this once, then log out and back in:
sudo usermod -aG dialout "$USER"
Development aids
scripts/serial_log.sh [seconds] [command…] records the serial output, and can send commands to the firmware first. For example, scripts/serial_log.sh 30 short sleep:12 burst sets short screen timeouts, waits 12 s, then sends a burst of Toasts.
| Command | Effect |
|---|---|
burst |
Publishes 5 Notifications at once |
key up|down|left|right|select|back|home |
Injects a logical key press |
sound on / sound off |
Toggles the Sound setting (beep + LED) |
short / normal |
Screen timeouts 5 s / 10 s, or 30 s / 60 s |
wifi add <ssid><TAB><password> |
Adds a Saved Network (so credentials stay out of the repo) |
log <text> |
Appends a line to a test IRC Log (/irc/dev/#test/<date>.log) |
sd list |
Lists the files of each Storage Clean-up category |
irc start |
Starts the IRC Service (normally done by opening the IRC App) |
irc say <buffer> <text> |
Types into a Buffer, commands included (irc say 0 /join #test) |
irc dump |
Prints IRC status, memory, and the last lines of each Buffer |
wifi status |
Prints Wi-Fi state, network, signal, clock and free heap |
scripts/flash.sh stops a running serial log first, since it would hold the port.