M1 step 2: Wi-Fi Service, Saved Networks, NTP, Settings page

- lib/wifi (host-tested): SavedNetworks (up to 8, validated, hidden
  flag, persisted) and WifiController (joins the strongest Saved
  Network, tries hidden ones in turn, backoff 10/30/60 s, connect
  timeout, Monitoring override, radio off without Saved Networks)
- WifiService carries out the controller's actions, sets the EU
  country code, and syncs the Clock over SNTP without touching the TZ
- Wi-Fi On/Off setting; Settings > Wi-Fi page: status, add from a scan
  or a hidden network, forget
- Status Bar: W + signal bars, W? while searching, MON while monitoring
- Serial: wifi add / wifi status (replaces the step 1 heap probe)

Verified on the device: joins the test network ~5 s after boot, clock
set over NTP, ~129 KB free heap while connected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

README.md

@@ -47,5 +47,7 @@ sudo usermod -aG dialout "$USER"
 | `key up\|down\|left\|right\|select\|back\|home` | Injects a logical key press |
 | `sound on` / `sound off` | Toggles the Sound setting (beep + LED) |
 | `short` / `normal` | Screen timeouts 5 s / 10 s, or 30 s / 60 s |
+| `wifi add <ssid><TAB><password>` | Adds a Saved Network (so credentials stay out of the repo) |
+| `wifi status` | Prints Wi-Fi state, network, signal, clock and free heap |
 
 `scripts/flash.sh` stops a running serial log first, since it would hold the port.