Every screen's keys are constant tables in lib/core/src/app_keys.h (52 of
them, each under an `// id: Title` comment). An App's help() picks the table
of the state it is in. site/tools/gen_dev_docs.py reads the same file and
writes site/data/keys.toml; the `keys` shortcode shows a screen's tables on
its guide page, and /guide/keys/ shows all of them.
The Site job fails when the data file is out of date or a page asks for a
table that doesn't exist, and now also runs when app_keys.h changes. A key
added to an App shows up on the website without anyone editing a page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Fn+h on any screen, text fields included, and ? outside Text Entry, open a
panel over the content area: the screen's own keys, then the ones that work
everywhere. Every App declares its keys for the state it is in (pages,
viewers, dialogs and text fields answer for themselves); the App manager
opens the panel and takes every key while it is open.
About 30 hint lines are gone, from every App. What stays on a screen is
state. The first-start Setup keeps its hints and teaches the key; a device
set up before gets one Toast, once. The guide and the FAQ open with it.
`key help` over the consoles.
476 host tests (8 new). Checked on the device with key help and screenshots:
the Launcher, all nine Apps and several of their states. 8.5 KB of flash and
40 bytes of static RAM. Decisions Q196 to Q203 in docs/milestones/U1.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
There is no Debug Build any more (ADR 0010, issue #68, Q188 to Q195). The
console and the test commands are compiled into every firmware. It listens
only while Settings > Debug Console is on, which isn't the default; off,
neither its task nor its 4 KB ring exists. The token is made by the device
and shown on that page; a client proves it knows it by answering a challenge
with an HMAC, so it never crosses the network, and five wrong answers close
the console for a minute. DBG in the Status Bar while it listens.
Over USB serial only: debug on, debug token <value>, debug token new.
scripts/flash.sh --debug uses them to set a device up with the developer's
token. scripts/rdbg.py takes the token from -t, $RORO_DEBUG_TOKEN or the
file, answers the challenge, and fetches a release's ELF to decode a crash.
Gone: the cardputer-adv-debug environment, RORO_DEBUG, the +debug version,
scripts/debug_flags.py, update install ... force, and the rule that a Debug
Build doesn't install releases. Old clients and old firmwares don't talk to
each other.
Against the builds it replaces: 30 KB more flash and 88 bytes more static
RAM than the release, 4 KB less RAM than the Debug Build. 468 host tests.
Checked on the device: off by default, login, the pause after wrong tokens,
Safe Mode with the console, the setting surviving an update, debug off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The Storage App browses the SD card: folders first with sizes and dates,
three sorts, one item at a time with a clipboard (c, x, v), rename, delete
after counting what's inside, new folder, details. A listing holds 256
entries and says when a folder has more.
FileOps does the card's work for the App and the console alike, one
operation at a time on the storage task in turns of about 150 ms, so Logs
and Captures are still written during a long copy. A copy shows progress,
can be cancelled (what it wrote is taken back) and compares sizes after.
The read-only rules are checked there: the firmware's top-level folders,
/gemini/cache, and files being written (a Track, a Capture, an upload,
today's IRC Logs). A listing reads the folder straight from FatFs: through
the Arduino File, 329 entries took over two seconds.
Viewers by type: text read a screen at a time whatever the file's size
(logs open at the end), a hex dump, a Capture's packets as the LoRa Scanner
lists them, a Track's summary, and an Update File checked as an install
would check it, without writing anything. Tab shows any file as hex or text.
Settings > Storage is gone: usage, Storage Clean-up and Erase are the App's
Maintenance, behind a warning. The Storage Warning points there.
The Clock sets the system time whatever its source, so files are dated
correctly with a GNSS Fix alone (Q137).
Console: cp, mv, mkdir, du, cancel; rm takes folders and follows the rules;
ls shows dates; Debug Builds get `sd fill`.
424 host tests. Checked on the device: docs/milestones/F1.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- EcdsaVerifier (mbedTLS, embedded public key) and EspOtaSink (writes
the inactive app slot, esp_ota_end validates the image, then sets
the boot partition)
- UpdateService: listens on TCP 3232 (and mDNS roro9stack-<id>) while
Wi-Fi is Connected; streams into UpdateParser; replies OK/ERR to the
sender; remembers the pending version so a Rollback is reported
after the reboot
- Probation (host-tested): confirm after the first frame + 30 s + Wi-Fi
(if configured); roll back if configured Wi-Fi never connects in 3 min
- Main loop: full-screen progress while receiving; restart once
installed, waiting up to 60 s for Text Entry to end
- Settings > Firmware: version, Probation status, push address and
name, and the .ota files in /updates on the SD card to install
- StorageService.runJob() runs work on the storage task (SD installs)
- wifi status prints IP and running version; RORO_TEST_CRASH test hook
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/storage_model (host-tested): FAT-safe names, daily Log paths,
dates from Log/Capture file names, CleanupPlan by category and age,
byte formatting
- StorageService does all card I/O on its task: queued Log lines are
written in batches each second (dropped while Logs are paused),
plus file listing and deletion jobs
- Settings > Storage moves into StoragePage: usage, Clean up
(category, age with size preview, confirmation), Erase SD card
- Clock: local date for Log names
- Serial: log <text>, sd list
Verified on the device: lines land in /irc/dev/#test/2026-10-02.log
with folders created as needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/wifi (host-tested): SavedNetworks (up to 8, validated, hidden
flag, persisted) and WifiController (joins the strongest Saved
Network, tries hidden ones in turn, backoff 10/30/60 s, connect
timeout, Monitoring override, radio off without Saved Networks)
- WifiService carries out the controller's actions, sets the EU
country code, and syncs the Clock over SNTP without touching the TZ
- Wi-Fi On/Off setting; Settings > Wi-Fi page: status, add from a scan
or a hidden network, forget
- Status Bar: W + signal bars, W? while searching, MON while monitoring
- Serial: wifi add / wifi status (replaces the step 1 heap probe)
Verified on the device: joins the test network ~5 s after boot, clock
set over NTP, ~129 KB free heap while connected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/apps_model (host-tested): SettingsMenu (rows, readable values,
choices, validation messages) and SetupWizard (names, Region
confirmation, timezone; saves only when finished)
- AppManager: modal Apps that Home/Back can't leave (setup wizard)
- SettingsApp: all settings plus Storage (usage, erase SD behind a
dialog) and About (version, node id, battery, memory, uptime) pages,
replacing the temporary Diagnostics App
- SetupApp: first-boot wizard, opened modally until SetupDone
- Node id and default names derived from the MAC like Meshtastic
- Widget demo is now hidden (About, then w)
- lib_ldf_mode = deep+ so libraries see each other's headers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twislaandClaude Opus 5.5