The `key` command stamps the power timer from millis(); the power tick
then compared with its pass's older time, and the unsigned difference read
as 49 days without a key. The screen state went Off for one tick, and the
next key was swallowed as a wake-up: about one remote key in twenty-five.
Keys from the keyboard pass the loop's own time and were never affected.
The same shape as #46. PowerPolicy::update now treats a stamp from the
future as "just now", with a test.
rdbg.py: piped lines written while it was still connecting stayed in
Python's read buffer until the next line arrived (readline() behind
select()). It reads the descriptor directly now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
New commands everywhere: ls, rm and install <path> (Update from SD
without the Firmware page), all as Storage Service jobs. In Debug
Builds the console task answers get and put (one storage job per
transfer, file kept open, TCP flow control: about 300 KB/s, against
55 KB/s over serial) and screenshot (the RGB332 frame the UI composes
into). rdbg.py turns those into files and PNGs.
A failed put closes the connection: the rest of the file had been
parsed as commands. Card writes are retried 3 times after closing,
truncating to the last good byte and reopening, since FATFS keeps a
file in error after one failed write (seen once at 1.3 MB on this card).
onStorage() decides with one compare-and-swap whether the job or the
timeout wins, so an abandoned job can't touch a returned stack frame.
Verified on the device: screenshot; a get round trip byte-identical;
4 puts in a row; a tampered .ota refused by install; a good one put,
installed from SD, confirmed on Probation. The retry path itself has
not fired since it was added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Every build now records at boot which version runs and, after a crash
restart, which one crashed (even across a Rollback). The core dump
summary (task, PC, reason, backtrace) is printed and raised as a
Notification; `crash` shows it later. After 3 crash restarts in a row
the firmware starts in Safe Mode: clock, Wi-Fi, Update Service and Debug
Console only (SafeMode, 2 host tests). A normal restart or a minute up
resets the count.
The main loop is now on the task watchdog (enableLoopWDT): Arduino only
watched core 0's idle task, so a stuck loop hung the device for good.
The Update Service restarts into an installed update by itself if the
main loop hasn't after 90 s.
Debug Builds: `coredump get` and `reset` are answered by the console's
own task; rdbg.py crash decodes the backtrace and rdbg.py coredump runs
esp-coredump, against ELFs archived by version and digest in .pio/elves.
The StorageService mutex is now made in the constructor: Safe Mode never
starts that Service, and `info` crashed on the null mutex, 29 times in a
row before the fix was pushed into Safe Mode over Wi-Fi.
Verified on the device: crash report and full core dump decoded over
Wi-Fi; Safe Mode at exactly 3 crashes, left by `reboot`; a hung loop
caught by the watchdog in 5 s; `reset` from the console task. ADR 0005.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
cardputer-adv-debug (-DRORO_DEBUG, version +debug) adds a Debug Console:
after a token line, a client gets the last 6 KB of console output, live
lines (ESP-IDF logs included) and the serial commands. The socket task
only queues lines; the main loop runs them. Release builds compile none
of it. The token lives in ~/.config/roro9stack/debug-token, created by
_docker.sh and passed into the container.
All output now goes through `console`, which never waits for USB: a host
that was attached but not reading stalled the main loop up to 2 s per
line. New commands everywhere: info (slots with their versions from NVS,
since the framework stamps its own into each image), tasks, reboot,
boot other, log level, help. scripts/rdbg.py is the client; flash.sh
--debug builds it; CI builds both variants. ADR 0004.
Verified on the device: USB-flashed, then updated over Wi-Fi to a Debug
Build that confirmed on Probation; both slots hold Debug Builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twislaandClaude Opus 5.5