scripts/sd_put.sh <file> [card path] sends a file (by default into
/updates, for Update from SD) without taking the card out. The serial
driver drops bytes once its receive buffer is full, so the transfer is
stop-and-wait: 1 KB chunks, each acknowledged once the Storage Service
has written it, into a 2 KB receive buffer. The device checks the
SHA-256 before renaming <path>.part into place, and gives up after 5 s
of silence or a card job that never returns. FileReceiver holds the
logic, with 12 host tests. About 55 KB/s: 1.6 MB in under 30 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The Arduino network client treats a half-closed connection as closed,
so the device's reply after the sender's EOF was lost. The header
already carries the image size: UpdateParser::complete() lets the
device finish and answer while the connection is open. ota_push.py
half-closes only if no answer comes within 3 s, for older firmware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- scripts/ota_keygen.sh: ECDSA P-256 key pair; the private key goes to
~/.config/roro9stack/ (0600), the public key to keys/ and
src/platform/ota_public_key.h; .gitignore refuses *key.pem
- scripts/make_ota.py: wraps firmware.bin into a signed .ota (openssl)
- scripts/ota_push.py: sends it over TCP 3232, prints the device's answer
- scripts/flash.sh --ota <host>: build, sign, push
Checked: a generated .ota has the documented layout and its signature
verifies with openssl against the committed public key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The firmware accepts burst, key <name>, sound on|off and short|normal
over serial, so UI behaviour can be reproduced on the device without
the keyboard. scripts/serial_log.sh records (and drives) it in a named
container that flash.sh removes before uploading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- pioarduino platform 55.03.312 (Arduino-ESP32 3.3.x / ESP-IDF 5.5),
board m5stack-stamps3, M5Cardputer 1.1.1
- native env with Unity for host-side tests
- scripts/ci.sh and scripts/flash.sh run PlatformIO in a container
- version injected from git describe
- boot stub shows name, version and pressed keys
- GPL-3.0 license
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twislaandClaude Opus 5.5