The Arduino network client treats a half-closed connection as closed,
so the device's reply after the sender's EOF was lost. The header
already carries the image size: UpdateParser::complete() lets the
device finish and answer while the connection is open. ota_push.py
half-closes only if no answer comes within 3 s, for older firmware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- EcdsaVerifier (mbedTLS, embedded public key) and EspOtaSink (writes
the inactive app slot, esp_ota_end validates the image, then sets
the boot partition)
- UpdateService: listens on TCP 3232 (and mDNS roro9stack-<id>) while
Wi-Fi is Connected; streams into UpdateParser; replies OK/ERR to the
sender; remembers the pending version so a Rollback is reported
after the reboot
- Probation (host-tested): confirm after the first frame + 30 s + Wi-Fi
(if configured); roll back if configured Wi-Fi never connects in 3 min
- Main loop: full-screen progress while receiving; restart once
installed, waiting up to 60 s for Text Entry to end
- Settings > Firmware: version, Probation status, push address and
name, and the .ota files in /updates on the SD card to install
- StorageService.runJob() runs work on the storage task (SD installs)
- wifi status prints IP and running version; RORO_TEST_CRASH test hook
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/wifi (host-tested): scan_log (CSV field quoting, header/row, a
once-per-interval throttle) and network_list_view (sort by signal /
channel / name, filter open-only / hide-hidden / strong-only)
- ScanEntry moved to lib/wifi so both are testable on the PC
- Wi-Fi Tools networks view: s sort, o/h/w filters, l toggles logging
to /wifi/scans/<date>.csv (header + one row per AP per logged scan,
throttled 30 s, needs the clock for timestamps); foreground-only
- Wi-Fi scan logs replace probe-request logs as a clean-up category
- Serial: cat <path>, and key <char> injects a character
Verified on the device: CSV written with header, timestamps, BSSID,
channel, RSSI, security and SSID; hidden networks marked.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- With NickServ, auto-join waits for the logged-in reply (900) or 2 s
at most, so registered-only IRC channels let us in
- A failed SASL login falls back to NickServ (its own password, or the
SASL account and password)
- IDENTIFY names the account explicitly, and once logged in on a
fallback nick, REGAIN takes ours back from a stale session
- Auto-join entries take keys ("#private key, #public"); keys from
/join are reused when rejoining; keyed channels go first in JOIN
- Serial irc dump: whole Buffers, and which login is configured
(never the secrets)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The IRC App edited the live config while the IRC task could be reading
it to connect. The App now edits a copy; applyConfig() validates it and
swaps it in under the lock, and the task connects from a snapshot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/wifi (host-tested): channel occupancy (neighbour spill, signal
weighting, quietest of 1/6/11) and a signal tracker (history, lost
detection, click interval)
- WifiService: scan results carry BSSID, channel and security; a scan
can target one channel for quick tracker refreshes; endListScans()
turns the radio back off when Wi-Fi is disabled
- Wi-Fi Tools App: networks nearby, channel occupancy bars, signal
tracker with clicks (m to mute)
- M1 plan: Monitoring-mode views and captures deferred
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- Chat: header (Buffer n/N, unread elsewhere, topic or connection
state), wrapped hh:mm <nick> lines (own in accent, Mentions green,
info grey), input line; Tab cycles Buffers, Fn+Up/Down scrolls back,
Enter sends, Back leaves while the IRC Service keeps running
- /settings: server form (host, port, TLS, self-signed pinning, nick,
SASL, NickServ, auto-join); Save & reconnect restarts the session
- Opening the App starts the IRC Service; viewing a Buffer clears its
unread count; IrcSession gains a revision counter for redraws
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- IrcService: networking on its own task, TLS with the built-in CA
bundle (or trust-on-first-use pinning when self-signed is allowed),
plain TCP when TLS is off; connects only while Wi-Fi is Connected,
marks pauses for Monitoring, reconnects with backoff, pings a quiet
server, writes Logs, raises Notifications for Mentions
- Session: forget /quit once disconnected (it was handled every loop);
the server Buffer never counts as unread (MOTD showed as [4])
- Status Bar: unread count
- Frame buffer 16 -> 8-bit colour (M1 Q46): min free heap with IRC on
TLS went from 51 KB to 79 KB
- Serial: irc start / say / dump
Verified on the device against irc.libera.chat:6697: certificate
checked, joined #roro9stack-test, sent a message, quit cleanly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/storage_model (host-tested): FAT-safe names, daily Log paths,
dates from Log/Capture file names, CleanupPlan by category and age,
byte formatting
- StorageService does all card I/O on its task: queued Log lines are
written in batches each second (dropped while Logs are paused),
plus file listing and deletion jobs
- Settings > Storage moves into StoragePage: usage, Clean up
(category, age with size preview, confirmation), Erase SD card
- Clock: local date for Log names
- Serial: log <text>, sd list
Verified on the device: lines land in /irc/dev/#test/2026-10-02.log
with folders created as needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
- lib/wifi (host-tested): SavedNetworks (up to 8, validated, hidden
flag, persisted) and WifiController (joins the strongest Saved
Network, tries hidden ones in turn, backoff 10/30/60 s, connect
timeout, Monitoring override, radio off without Saved Networks)
- WifiService carries out the controller's actions, sets the EU
country code, and syncs the Clock over SNTP without touching the TZ
- Wi-Fi On/Off setting; Settings > Wi-Fi page: status, add from a scan
or a hidden network, forget
- Status Bar: W + signal bars, W? while searching, MON while monitoring
- Serial: wifi add / wifi status (replaces the step 1 heap probe)
Verified on the device: joins the test network ~5 s after boot, clock
set over NTP, ~129 KB free heap while connected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
An Off screen turns on dimmed for the Toast's duration so the user can
see what beeped. It isn't user activity: the timeouts aren't restarted,
and a key pressed meanwhile reaches the App.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Repartitions the whole card (f_fdisk + f_mkfs) on the storage task.
Temporarily triggered from the diagnostics screen by typing FORMAT and
Enter; moves to Settings > Storage in step 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
lib/services holds the host-tested logic:
- Settings: typed, validated, persisted, SettingChanged events,
transmit gated on a confirmed Region
- BatteryEstimator: LiPo curve, median smoothing against TX sags
- ClockModel: source priority GNSS > NTP > mesh, relative ages,
Europe/Brussels local time via POSIX TZ
- StorageMonitor: warning once per boot at 80%, Logs stop at 90%,
Captures stop with < 2 MiB left
- PowerPolicy / PowerButton: dim/off timeouts, wake key swallowed only
when the screen was off, G0 long press
src/services wires them to the hardware (NVS, battery ADC, SD on the
shared SPI bus with the LoRa CS held high, backlight, deep sleep), and
main.cpp is a temporary diagnostics screen for the hardware checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twislaandClaude Opus 5.5