The rest of the issue's list. tls makes a handshake that checks nothing,
then says the certificate in words: who it is for, who signed it, until
when, and whether this device's roots and the name asked for accept it,
with the reason when they don't. ntp compares a time server's clock with
the device's. netstat lists what listens and what is connected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Network troubleshooting from the device itself, in the Shell and over both
consoles. ping, nslookup, port and traceroute each run on a task of their
own and print as they go, to the console that asked; one at a time, and
`cancel` stops it. ifconfig and arp answer at once: the interfaces (Wi-Fi
and the VPN), which is the default route, the DNS servers, the neighbours.
nslookup asks a DNS server itself, so it can say which server answered and
in how long, and ask another. A sized ping finds what a tunnel really
carries.
With a how-to, "When the network doesn't work", and the rest of the docs.
tls, ntp and netstat from the issue's list are not in this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The device joins a WireGuard network over whatever Wi-Fi it is on: one
peer, IPv4. A client's .conf is imported from the card (/vpn/wg0.conf) and
kept in the device's settings, private key included, never shown; Settings
offers to delete the file. A switch brings the tunnel up until the next
restart, "Start with Wi-Fi" every time; it waits for the clock, which a
handshake needs. VPN shows in the Status Bar.
The protocol is esphome/wireguard 0.4.8. It calls lwIP without lwIP's lock,
which this framework checks: every call into it is made with the lock held.
What goes through the tunnel is everything (AllowedIPs 0.0.0.0/0) or the
one subnet the device's tunnel address is in: lwIP routes by an
interface's subnet or by default, nothing finer. The import says how many
ranges it can't reach.
Checked against a test peer in both directions and against a real server,
with a configuration uploaded from a phone (docs/milestones/N1.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
A Counted<> wrapper around the network clients adds what goes through
their buffer read and write to a per-service counter (IRC, Gemini, Debug
Console, Updates); the single-byte calls and print() end up there, so
each byte counts once. `net` prints the totals. For TLS it's the plain
text the service sees.
Checked on the device: a Gemini fetch counts 164,986 in (a 164,970-byte
page and its 16-byte header) and 42 out (the URL and CRLF).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The plan and decisions Q105 to Q116 (docs/milestones/S1.md). lib/net:
strict IPv4 parsing, prefix and mask, and the checks a Fixed setting must
pass, each refusal with its reason. A Saved Network is Automatic or Fixed
(address/prefix and an optional gateway), kept with it in flash. Settings:
two DNS servers (9.9.9.9, 1.1.1.1), "Always use my DNS", two NTP servers
(pool.ntp.org, time.cloudflare.com). Host-tested: 383 tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twislaandClaude Opus 5.5