Fn+p saves the screen as it is to /screenshots, as the Shell's `screenshot`
does, from anywhere: text fields, dialogs and the help panel included. The
key never reaches an App.
It refuses on Settings > Debug Console, which shows the token: a picture of
that page is a copy of the token in a file (App::showsSecret). `key shot`
presses it over the consoles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The editor held the whole note in memory and stopped at 16 KB. It now keeps
a window of the file around the cursor, and the rest on the card as a list
of pieces (notes::NoteDocument). Memory with a note open is what it was.
Up to 64 KB a save rewrites the file, as before. Above, the five-second
save appends what changed to <note>.edit, and the file is rewritten on
leaving the note, with a progress bar. After a power cut, opening the note
picks the edit up where it was saved; a rewrite cut short is finished or
dropped, never half applied.
Also: Ctrl with Fn+Up/Down go to the start and end of the note; the
consoles' `key` command takes ctrl-, alt- and shift-; the Storage App's
`e` no longer refuses a big file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Tab used to complete a command's first word only. It now follows the help
text word by word: `lora st` gives `lora status`, `gnss track ` lists
`start stop`. The words are read from the help text as written, so a new
command completes with no table to keep; the Shell's own words are added in
the same notation.
`*` and `?` in the last part of a path, for ls, du, rm, cp and mv, from the
Shell and both consoles. The command runs once for each name matched, lined
up and run by the main loop as each finishes; `cancel` empties the line-up.
64 matches at most, refused whole past that. In the Shell, rm with a pattern
asks once, with the count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The Shell shows the replies to its own commands and nothing else. The
console knows who each line is printed for (Console::As, Console::origin):
a command run from the Shell prints as the Shell's, and what answers it
later from another task carries that along (ls, tasks, du, cp, update
check, sd list, screenshot, gemini get). Ctrl+b shows everything instead.
This replaces the ten-second window, which was a guess.
An App's name with a capital opens it (Notes, Irc, Wifi, Gnss, Gemini, Lora,
Storage, Shell, System, Settings), from the Shell and from the consoles.
rm needs -r for a folder, here and over the consoles. In the Shell a file,
or a folder with something in it, is asked about unless -f; an empty folder
with -r goes without a word.
The Shell now hands its line to the main loop to run: run from inside the
key handler, rm on a folder overflowed the loop's stack and crashed the
device. `info` says which App is in front.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
An App in the Launcher that runs the same commands as USB serial and the
Debug Console, trusted like the first. It shows what the console prints
while it is open, through a second ring of the console's that exists only
meanwhile; Ctrl+b keeps only what follows your own commands. Tab completes
a command's name from the firmware's help text, Fn with up and down recalls
earlier lines, Alt with up and down scrolls back. `rm` asks first in the
Shell, `rm -f` doesn't. Nothing is kept once the App is left.
`screenshot [seconds]` saves the screen as a PNG in /screenshots on the
card, now or after a pause: written a row at a time, indexed colour with
RGB332 as the palette, in one stored deflate block.
487 host tests (11 new: the PNG writer, the Shell's log filter, Tab).
Checked on the device over the Debug Console: commands, Tab, history, a
screenshot fetched and decoded on the PC, rm with and without the question,
a delayed screenshot of another screen. 12 KB of flash; 7 KB of heap while
open. Decisions Q204 to Q212 in docs/milestones/S1.md. Safe Mode: #77.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Fn+h on any screen, text fields included, and ? outside Text Entry, open a
panel over the content area: the screen's own keys, then the ones that work
everywhere. Every App declares its keys for the state it is in (pages,
viewers, dialogs and text fields answer for themselves); the App manager
opens the panel and takes every key while it is open.
About 30 hint lines are gone, from every App. What stays on a screen is
state. The first-start Setup keeps its hints and teaches the key; a device
set up before gets one Toast, once. The guide and the FAQ open with it.
`key help` over the consoles.
476 host tests (8 new). Checked on the device with key help and screenshots:
the Launcher, all nine Apps and several of their states. 8.5 KB of flash and
40 bytes of static RAM. Decisions Q196 to Q203 in docs/milestones/U1.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The framework's server begin() fails without a word: the console's task now
asks whether it listens, says so, and tries again. `debug off <seconds>`
closes the console and reopens it after the pause, which is the only way to
test its closing and reopening from afar.
Checked on the device: 25 closings and reopenings, each back a second after
the pause. Free heap dips about 270 bytes for each connection the device
closes and is all back two minutes later (TCP keeps a closed connection that
long): not a leak.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
There is no Debug Build any more (ADR 0010, issue #68, Q188 to Q195). The
console and the test commands are compiled into every firmware. It listens
only while Settings > Debug Console is on, which isn't the default; off,
neither its task nor its 4 KB ring exists. The token is made by the device
and shown on that page; a client proves it knows it by answering a challenge
with an HMAC, so it never crosses the network, and five wrong answers close
the console for a minute. DBG in the Status Bar while it listens.
Over USB serial only: debug on, debug token <value>, debug token new.
scripts/flash.sh --debug uses them to set a device up with the developer's
token. scripts/rdbg.py takes the token from -t, $RORO_DEBUG_TOKEN or the
file, answers the challenge, and fetches a release's ELF to decode a crash.
Gone: the cardputer-adv-debug environment, RORO_DEBUG, the +debug version,
scripts/debug_flags.py, update install ... force, and the rule that a Debug
Build doesn't install releases. Old clients and old firmwares don't talk to
each other.
Against the builds it replaces: 30 KB more flash and 88 bytes more static
RAM than the release, 4 KB less RAM than the Debug Build. 468 host tests.
Checked on the device: off by default, login, the pause after wrong tokens,
Safe Mode with the console, the setting surviving an update, debug off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
/dev/ has Debug Builds and the Debug Console (builds and the token, the
console and its protocol, files and screenshots, driving the UI, crashes and
Safe Mode, the command reference), Build, test and release (including how an
update works), the architecture decisions and the milestone plans.
Generated from the repository by site/tools/gen_dev_docs.py: the ADRs, the
milestones, the README's sections, and the command reference, read from the
firmware's own `help` text. The pages are committed (Zola cannot read outside
its folder); the Site workflow checks they are current, and now also runs
when src/main.cpp changes. M0, M1 and CONTEXT.md are not published.
README: the gnss commands that the table lacked.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twislaandClaude Opus 5.5