There is no Debug Build any more (ADR 0010, issue #68, Q188 to Q195). The
console and the test commands are compiled into every firmware. It listens
only while Settings > Debug Console is on, which isn't the default; off,
neither its task nor its 4 KB ring exists. The token is made by the device
and shown on that page; a client proves it knows it by answering a challenge
with an HMAC, so it never crosses the network, and five wrong answers close
the console for a minute. DBG in the Status Bar while it listens.
Over USB serial only: debug on, debug token <value>, debug token new.
scripts/flash.sh --debug uses them to set a device up with the developer's
token. scripts/rdbg.py takes the token from -t, $RORO_DEBUG_TOKEN or the
file, answers the challenge, and fetches a release's ELF to decode a crash.
Gone: the cardputer-adv-debug environment, RORO_DEBUG, the +debug version,
scripts/debug_flags.py, update install ... force, and the rule that a Debug
Build doesn't install releases. Old clients and old firmwares don't talk to
each other.
Against the builds it replaces: 30 KB more flash and 88 bytes more static
RAM than the release, 4 KB less RAM than the Debug Build. 468 host tests.
Checked on the device: off by default, login, the pause after wrong tokens,
Safe Mode with the console, the setting surviving an update, debug off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
/dev/ has Debug Builds and the Debug Console (builds and the token, the
console and its protocol, files and screenshots, driving the UI, crashes and
Safe Mode, the command reference), Build, test and release (including how an
update works), the architecture decisions and the milestone plans.
Generated from the repository by site/tools/gen_dev_docs.py: the ADRs, the
milestones, the README's sections, and the command reference, read from the
firmware's own `help` text. The pages are committed (Zola cannot read outside
its folder); the Site workflow checks they are current, and now also runs
when src/main.cpp changes. M0, M1 and CONTEXT.md are not published.
README: the gnss commands that the table lacked.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
site.yml builds the site with a Zola pinned by its checksum and checks the
pages when site/, docs/, README.md or CONTEXT.md change. ci.yml gets
paths-ignore for the same files on pushes to main and on pull requests; a
tag always runs it (Gitea doesn't apply path filters to tags). A change
touching both runs both.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
A branch with an open pull request ran twice per push: once for the push,
once for the pull request. Pushes to main still run the tests and publish
the badges; every other branch is tested by its pull request.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
Rebuilding both firmwares on every push was more than anyone looked at.
A push now runs the host tests with their coverage (under two minutes);
a pull request adds the release firmware and the Debug Build, and is how
changes reach main; a tag still does everything before it releases.
Pull requests from forks don't run. scripts/ci.sh takes 'tests' or
'builds' for one half; coverage.sh now fails when a test fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
scripts/coverage.sh builds the host tests with coverage counters and
reports with gcovr: 94.6% of the 3,193 lines of lib/ today (lib/SD and
src/ have no host tests and aren't counted). CI runs it on every push,
puts the figure in the job's summary, and on main publishes a coverage
badge and a latest-release badge to the branch 'badges'. The README shows
them next to Gitea's own badge for the workflow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The runner now gives each job a container. The workflow asks for
python:3.12-slim, installs git, a compiler and PlatformIO, and mounts the
roro9stack-pio volume as the cache; the scripts skip their own docker run
when RORO_NO_DOCKER says they're in the build container already. A tag
from before the framework was rebuilt gets the stock framework libraries
back before it builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
The workflow runs on the runner's host and builds in the project's Docker
image through scripts/ci.sh, as on a developer's machine. A tag v*, or a
run by hand for an older tag, builds that tag's sources, signs the Update
File with the key held in the repository's secrets, checks the signature
against the public key in the sources, and publishes a Gitea release with
the .ota, the factory image, the ELF and checksums.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
twislaandClaude Opus 5.5