Rebuild the framework with smaller TLS buffers (ADR 0006)

custom_sdkconfig makes pioarduino regenerate the ESP-IDF libraries:
asymmetric TLS buffers (16 KB in, 4 KB out) and dynamic buffers that
free handshake-only data once connected. The rebuild also follows the
board: no PSRAM, 8 MB flash. The project now carries the partition
table the hybrid build needs (identical to the framework's: the app
slots must not move under updates over the air). Generated files are
ignored.

Debug Build, GNSS on, IRC on TLS: 78 KB free and a 59 KB low (M2 began
at 31 KB and 12.6 KB; the floor is 40 KB). The full stress set passes
on it: refused installs over Wi-Fi and from SD, put/get, screenshot,
core dump decode, Probation; under all of it at once, the low is 46 KB.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

README.md

@@ -18,6 +18,8 @@ scripts/ci.sh
 
 This runs the host-side unit tests (`test/`, `native` environment), then builds the firmware. The output is `.pio/build/cardputer-adv/firmware.factory.bin`.
 
+The framework is rebuilt with the TLS settings in `platformio.ini` (`custom_sdkconfig`, ADR 0006), so the first build after a fresh checkout takes about 4 minutes; later builds take under a minute.
+
 ## Flash
 
 1. Connect the Cardputer by USB-C.