M3 step 1: RadioLib and lora probe

The probe finds the SX1262 (TCXO 1.8 V works) and measures the antenna
path: the Cap's PI4IOE5V6408 at 0x43 must drive P0 high, or the receiver
is deaf (-111.9 dBm flat vs -87 to -94 dBm with P0 high). DIO2 makes no
difference to reception. Receive only; the radio is left asleep.

RadioLib 7.8.1 + probe: +23.6 KB flash, +656 B static RAM (release).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

src/main.cpp

@@ -20,6 +20,7 @@
 #include "key_mapper.h"
 #include "platform/console.h"
 #include "platform/crash_report.h"
+#include "platform/lora_probe.h"
 #include "platform/nvs_store.h"
 #include "platform/system_info.h"
 #include "service_manager.h"
@@ -347,6 +348,7 @@ static const char* const kHelp =
     "reboot            restart\n"
     "boot other        restart into the other app slot (manual Rollback)\n"
     "log level <0-5>   ESP-IDF log level (0 none ... 5 verbose)\n"
+    "lora probe        find the LoRa radio: chip, oscillator, antenna switch, noise floor (receive only)\n"
     "gnss status | gnss restart | gnss track start|stop | gnss nmea on|off | gnss send <sentence without $ and checksum>\n"
     "crash             the last crash: firmware, reason, task, backtrace\n"
     "coredump erase    forget the core dump in flash\n"
@@ -410,6 +412,7 @@ static void runCommand(String line) {
         });
     }
     if (line.startsWith("install ")) update->installFromSd(line.substring(8).c_str());  // Update from SD
+    if (line == "lora probe") loraProbe(console);
     if (line == "gnss status" && gnssService) gnssService->printStatus(console, millis());
     if ((line == "gnss nmea on" || line == "gnss nmea off") && gnssService) gnssService->setEcho(line.endsWith("on"));
     if (line == "gnss restart" && gnssService) gnssService->restart(millis());