One firmware: the Debug Console in every build, off until switched on, with the device's own token

There is no Debug Build any more (ADR 0010, issue #68, Q188 to Q195). The console and the test commands are compiled into every firmware. It listens only while Settings > Debug Console is on, which isn't the default; off, neither its task nor its 4 KB ring exists. The token is made by the device and shown on that page; a client proves it knows it by answering a challenge with an HMAC, so it never crosses the network, and five wrong answers close the console for a minute. DBG in the Status Bar while it listens. Over USB serial only: debug on, debug token <value>, debug token new. scripts/flash.sh --debug uses them to set a device up with the developer's token. scripts/rdbg.py takes the token from -t, $RORO_DEBUG_TOKEN or the file, answers the challenge, and fetches a release's ELF to decode a crash. Gone: the cardputer-adv-debug environment, RORO_DEBUG, the +debug version, scripts/debug_flags.py, update install ... force, and the rule that a Debug Build doesn't install releases. Old clients and old firmwares don't talk to each other. Against the builds it replaces: 30 KB more flash and 88 bytes more static RAM than the release, 4 KB less RAM than the Debug Build. 468 host tests. Checked on the device: off by default, login, the pause after wrong tokens, Safe Mode with the console, the setting surviving an update, debug off. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT
2026-10-06 22:59:35 +02:00
parent 1353e6a5f9
commit c68741cc46
65 changed files with 1245 additions and 374 deletions
@@ -1,5 +1,7 @@
 # A Debug Console over Wi-Fi, in Debug Builds only

+**Superseded in part by [ADR 0010](0010-debug-console-in-every-build.md) (2026-10-06):** there is no Debug Build any more. The console is in every firmware, off until switched on, and its token belongs to the device, not to the build. What this record says about how the console works (the ring, commands on the main loop, binary commands on its own task, one client) still holds.
+
 The goal of Firmware Updates is to manage the device without a cable, and that includes finding out what went wrong. So a **Debug Build** (`cardputer-adv-debug`, `-DRORO_DEBUG`, version suffix `+debug`) adds a **Debug Console** on TCP 2323: the serial console, over Wi-Fi. A client sends a token as its first line, then gets the last 4 KB of console output (boot messages included), every new line live, and runs the same commands as the serial port, plus a few that only make sense remotely. ESP-IDF's own log lines are teed into it.

 It's compiled out of release builds entirely, rather than switched off by a setting. A console that runs commands is a remote control: in a release build, nothing listens.