Help: Fn+h lists the keys of the screen you're on, and no screen names its keys any more (#69)

Fn+h on any screen, text fields included, and ? outside Text Entry, open a
panel over the content area: the screen's own keys, then the ones that work
everywhere. Every App declares its keys for the state it is in (pages,
viewers, dialogs and text fields answer for themselves); the App manager
opens the panel and takes every key while it is open.

About 30 hint lines are gone, from every App. What stays on a screen is
state. The first-start Setup keeps its hints and teaches the key; a device
set up before gets one Toast, once. The guide and the FAQ open with it.
`key help` over the consoles.

476 host tests (8 new). Checked on the device with key help and screenshots:
the Launcher, all nine Apps and several of their states. 8.5 KB of flash and
40 bytes of static RAM. Decisions Q196 to Q203 in docs/milestones/U1.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

README.md

@@ -8,6 +8,10 @@ A multi-app firmware for the **M5Stack Cardputer ADV** with the **Cap LoRa-1262*
 - Decisions: [docs/adr/](docs/adr/)
 - Milestones: [docs/milestones/](docs/milestones/)
 
+## On the device: one key
+
+**Fn+h, on any screen, lists the keys that work there** (`?` does the same outside a text field). No screen names its keys itself (docs/milestones/U1.md): each App declares them for the state it is in, and the help panel shows them, followed by the ones that work everywhere.
+
 ## Requirements
 
 Only **Docker** is needed. PlatformIO and the ESP32 toolchain run inside a container, and are cached in the `roro9stack-pio` Docker volume. The first build downloads about 1 GB and takes a few minutes.
@@ -159,7 +163,7 @@ A note holds up to 16 KB while it's edited. A bigger text file opens read-only i
 | Command | Effect |
 |---|---|
 | `burst` | Publishes 5 Notifications at once |
-| `key up\|down\|left\|right\|select\|back\|home`, or `key <char>` | Injects a key press |
+| `key up\|down\|left\|right\|select\|back\|home\|del\|tab\|space\|help`, or `key <char>` | Injects a key press (`help` is Fn+h: the keys of the screen that is showing) |
 | `sound on` / `sound off` | Toggles the Sound setting (beep + LED) |
 | `short` / `normal` | Screen timeouts 5 s / 10 s, or 30 s / 60 s |
 | `wifi add <ssid><TAB><password>` | Adds a Saved Network (so credentials stay out of the repo) |