The radio's noise: the GNSS receiver costs 8 dB; a setting pauses it (#20)

Debug Builds: `lora noise test` changes one thing at a time, Sweeps the
band, and reports the floor under each condition; it runs on the device
by itself, since one condition pauses Wi-Fi (not saved, so a restart
brings it back). Result, at 125 kHz: -117 dBm with the antenna switched
off, -106 with the GNSS receiver in standby, -98 with it running. The
receiver's serial line isn't it (one sentence a second changes nothing),
and neither are the main loop, the CPU frequency, Wi-Fi, the screen or
the radio's own regulator, all within 1 dB.

Settings > "Pause GNSS for LoRa", off by default: the receiver waits in
standby while the radio listens or sweeps, except during a Track, and
has a Fix again about 7 s after. The GNSS App says it's paused.

11 dB remain between the antenna with GNSS quiet and the chip alone,
untouched by anything that can be switched from the firmware.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

lib/services/src/settings.h

@@ -29,6 +29,7 @@ enum class Setting : uint8_t {
     DnsAlways,        // bool: use them on Automatic (DHCP) networks too, instead of DHCP's
     Ntp1,             // string: the first NTP server, a host name or an IPv4 address (S1, Q110)
     Ntp2,             // string: the second, or empty
+    GnssQuietForLora, // bool: put the GNSS receiver in standby while the LoRa radio listens (issue #20)
     Count
 };