The radio's noise: the GNSS receiver costs 8 dB; a setting pauses it (#20)

Debug Builds: `lora noise test` changes one thing at a time, Sweeps the
band, and reports the floor under each condition; it runs on the device
by itself, since one condition pauses Wi-Fi (not saved, so a restart
brings it back). Result, at 125 kHz: -117 dBm with the antenna switched
off, -106 with the GNSS receiver in standby, -98 with it running. The
receiver's serial line isn't it (one sentence a second changes nothing),
and neither are the main loop, the CPU frequency, Wi-Fi, the screen or
the radio's own regulator, all within 1 dB.

Settings > "Pause GNSS for LoRa", off by default: the receiver waits in
standby while the radio listens or sweeps, except during a Track, and
has a Fix again about 7 s after. The GNSS App says it's paused.

11 dB remain between the antenna with GNSS quiet and the chip alone,
untouched by anything that can be switched from the firmware.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

lib/services/src/settings.cpp

@@ -39,6 +39,7 @@ const Definition kDefinitions[] = {
     {"dns_always", Kind::Bool, 0, nullptr, 0, 1},
     {"ntp1", Kind::String, 0, "pool.ntp.org", 1, 63},
     {"ntp2", Kind::String, 0, "time.cloudflare.com", 0, 63},
+    {"gnss_quiet", Kind::Bool, 0, nullptr, 0, 1},  // off: GNSS stays on, as decided in M2 (Q58)
 };
 static_assert(sizeof(kDefinitions) / sizeof(kDefinitions[0]) == static_cast<size_t>(Setting::Count),
               "every Setting needs a definition");