SD driver: a dummy byte before the ready test; say why a write failed (#21)

The card "refused" a write about once in 2,000 multi-block writes: three
1.7 MB uploads in ten. Measured with a driver that records where it gives
up: every time, all blocks were accepted, and the status check after Stop
Tran came back as 0xFF or 0x1F. The driver tests for ready with the first
byte after selecting the card, which reads 0xFF before the card has
signalled busy, so CMD13 went out mid-programming. A dummy byte first, as
in ChaN's reference driver, and one after Stop Tran.

30 uploads in a row since, each read back by SHA-256, ten with the radio
listening: no fault. 10 MHz made no difference; the card stays at 20 MHz.

`info` shows the driver's write faults; `put` prints the step and the
card's answer when one happens. ADR 0007.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

lib/SD/src/sd_fault.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include <cstdint>
+
+namespace roro {
+
+// Why the SD driver last gave up on a write (see sd_diskio.cpp, issue #21). The framework's driver
+// fails without saying why; ours records it.
+struct SdFault {
+    enum Step : uint8_t {
+        None,
+        EraseCount,   // ACMD23 before a multi-block write was refused
+        Select,       // the card stayed busy for 500 ms
+        Command,      // the write command itself was refused
+        DataToken,    // the card's answer to a data block: 0x0B CRC error, 0x0D write error
+        BusyAfter,    // still busy 500 ms after the last block
+        Status,       // CMD13 after the write reported an error (resp)
+        StopCommand,  // CMD12 after a rejected block was refused
+    };
+    Step step = None;
+    uint8_t token = 0;   // the driver's or the card's answer at that step
+    uint32_t resp = 0;   // CMD13's status bits, for Status
+    uint32_t count = 0;  // failed writes since boot
+    uint32_t retried = 0;  // blocks resent after a CRC error, since boot
+};
+
+SdFault sdLastFault();
+
+}  // namespace roro