Shell: the console's commands on the device's own screen and keyboard (#67)

An App in the Launcher that runs the same commands as USB serial and the
Debug Console, trusted like the first. It shows what the console prints
while it is open, through a second ring of the console's that exists only
meanwhile; Ctrl+b keeps only what follows your own commands. Tab completes
a command's name from the firmware's help text, Fn with up and down recalls
earlier lines, Alt with up and down scrolls back. `rm` asks first in the
Shell, `rm -f` doesn't. Nothing is kept once the App is left.

`screenshot [seconds]` saves the screen as a PNG in /screenshots on the
card, now or after a pause: written a row at a time, indexed colour with
RGB332 as the palette, in one stored deflate block.

487 host tests (11 new: the PNG writer, the Shell's log filter, Tab).
Checked on the device over the Debug Console: commands, Tab, history, a
screenshot fetched and decoded on the PC, rm with and without the question,
a delayed screenshot of another screen. 12 KB of flash; 7 KB of heap while
open. Decisions Q204 to Q212 in docs/milestones/S1.md. Safe Mode: #77.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

README.md

@@ -156,6 +156,10 @@ A new note has no file until something is typed; its file is then named after it
 
 A note holds up to 16 KB while it's edited. A bigger text file opens read-only in the Storage App (editing any size is issue #47). The Storage App's text viewer has `e` to edit a file with the same editor, anywhere on the card, unless the file is read-only.
 
+## Shell
+
+The Shell App (docs/milestones/S1.md) runs the commands below on the device's own screen and keyboard: no PC, no cable, no Wi-Fi. It shows what the console prints while it is open; Ctrl+b hides everything but what follows your own commands. Tab completes a command's name, Fn with up and down recalls earlier lines, Alt with up and down scrolls back. `rm` asks before deleting (`rm -f` doesn't), `clear` empties the screen and `quit` leaves. It is trusted like the USB port: `debug on` and `debug token` work from it. It uses about 7 KB of memory while it is open, and none otherwise.
+
 ## Development aids
 
 `scripts/serial_log.sh [seconds] [command…]` records the serial output, and can send commands to the firmware first. For example, `scripts/serial_log.sh 30 short sleep:12 burst` sets short screen timeouts, waits 12 s, then sends a burst of Toasts.
@@ -187,7 +191,8 @@ A note holds up to 16 KB while it's edited. A bigger text file opens read-only i
 | `reboot` / `boot other` | Restart, or restart into the other app slot (a manual Rollback) |
 | `log level <0-5>` | ESP-IDF log level |
 | `ls [folder]` / `du <path>` | Lists a folder of the SD card with sizes and dates, or counts the files and bytes under a path |
-| `cp [-f] <from> <to>` / `mv [-f] <from> <to>` / `rm <path>` / `mkdir <path>` / `cancel` | What the Storage App does, with its rules: copy (folders too), move or rename, delete (a folder with what's in it), new folder. `-f` replaces a file that's in the way; a tab separates paths that hold spaces; `cancel` stops a copy or a delete |
+| `screenshot [seconds]` | The screen as a PNG in `/screenshots` on the card, now or after a pause to get to the screen you want (240 x 135, about 33 KB). Over the Debug Console a bare `screenshot` sends the screen to the PC instead |
+| `cp [-f] <from> <to>` / `mv [-f] <from> <to>` / `rm [-f] <path>` / `mkdir <path>` / `cancel` | What the Storage App does, with its rules: copy (folders too), move or rename, delete (a folder with what's in it), new folder. `-f` replaces a file that's in the way; a tab separates paths that hold spaces; `cancel` stops a copy or a delete |
 | `install <path>` | Update from SD with that `.ota` file, as Settings → Firmware does |
 | `update check` / `update list` / `update status` / `update install <tag>` | The project's releases on Gitea: look at the latest, list the last ten, say what's known, or download and install one |
 | `update pretend <version>` / `update probe <host>` / `update damage cut\|flip <n>` / `update daily` | Pretend to run another version (so a release counts as an update), see whether a server's certificate is accepted, cut or damage the next download, run the daily check again |