Keys: one table file for the device's help panel and the website's key tables (#72)

Every screen's keys are constant tables in lib/core/src/app_keys.h (52 of
them, each under an `// id: Title` comment). An App's help() picks the table
of the state it is in. site/tools/gen_dev_docs.py reads the same file and
writes site/data/keys.toml; the `keys` shortcode shows a screen's tables on
its guide page, and /guide/keys/ shows all of them.

The Site job fails when the data file is out of date or a page asks for a
table that doesn't exist, and now also runs when app_keys.h changes. A key
added to an App shows up on the website without anyone editing a page.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EhqxQ49eCju4CzKYNjZzwT

site/content/guide/basics.md

@@ -71,3 +71,9 @@ On a new device a short Setup asks four things, then never appears again. It als
 Put a microSD card in the Cardputer. Without one the radio, GNSS, Wi-Fi and IRC still work, but nothing can be saved: no notes, IRC logs, Wi-Fi scan logs, GPX tracks, LoRa captures or saved Gemini pages. The [Storage App](/guide/storage/) shows what is on the card.
 
 The firmware keeps its own folders at the top of the card (`captures`, `gemini`, `gnss`, `irc`, `updates`, `wifi`, plus `notes`). You can use the card in a computer too, but those names are the firmware's.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["launcher", "everywhere", "dialog", "text"]) }}

site/content/guide/gemini.md

@@ -40,3 +40,9 @@ Most capsules sign their own certificate. The first certificate seen for a host
 ## Big pages and memory
 
 With a card, every page streams to the card first, so a page larger than the device's memory still arrives whole and is read from the card as you scroll. Without a card, a page is limited to what fits in memory. If there is not enough free memory to open a secure connection, the fetch says so instead of failing silently; stopping IRC frees the most.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["gemini", "gemini-saved", "gemini-address", "gemini-answer"]) }}

site/content/guide/gnss.md

@@ -28,3 +28,9 @@ Once there is a fix, the device's clock follows it.
 ## Tracks
 
 <kbd>r</kbd> starts recording a **Track**: the route is saved as a **GPX** file on the SD card, in `/gnss/tracks` (named by date and time), and the Status Bar shows `REC`. Press <kbd>r</kbd> again to stop. A Track keeps recording with the App closed. It needs a card and a clock (a fix or Wi-Fi sets it); if it cannot start, the App says why: `GNSS is off`, `No SD card` or `Waiting for the time`. The [Storage App](/guide/storage/) opens a `.gpx` file and shows its points, start, duration and distance.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["gnss"]) }}

site/content/guide/irc.md

@@ -49,3 +49,9 @@ Every buffer is logged to the SD card, one file per day, under `/irc`. Logs stop
 
 - IRC **pauses** while Wi-Fi is monitoring (the Status Bar shows `MON`) and while the device **installs an update**. It reconnects and rejoins its channels afterwards; the App says `paused` in the meantime.
 - A secure connection costs memory: IRC's takes about 40 KB of the 107 KB the device has, and an update's download needs about 52 KB more. That is why IRC steps aside for an update, and why the daily update check waits for IRC to be disconnected (see [Updates](/guide/updates/)).
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["irc", "irc-settings", "irc-field"]) }}

site/content/guide/keys.md

@@ -0,0 +1,13 @@
++++
+title = "Every key"
+description = "The keys of every screen of the firmware, as the help panel lists them on the device: one table for each screen and state."
+weight = 12
+[extra]
+tag = "Reference"
++++
+
+On the device, <kbd>Fn</kbd> + <kbd>h</kbd> lists the keys of the screen you are on (and <kbd>?</kbd> does, when you are not typing). This page is all of those lists at once, generated from the same source the firmware reads: `lib/core/src/app_keys.h`.
+
+In the tables, `; . , /` are the arrow keys (up, down, left, right): alone when you are not typing, with <kbd>Fn</kbd> when you are. `` ` `` is Back, `Aa` is Shift, and two keys separated by spaces are two keys that do the two things listed.
+
+{{ keys(all=true) }}

site/content/guide/lora-scanner.md

@@ -33,3 +33,9 @@ A capture records packets into a **pcap** file with LoRaTap headers in `/capture
 ## The GNSS receiver raises the noise
 
 The GNSS receiver on the same Cap makes the radio's noise floor about **8 dB** worse while it runs. **Settings → Pause GNSS for LoRa** (off by default) puts the receiver on standby while the radio listens, except while a Track is being recorded.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["lora", "lora-packet", "lora-presets", "lora-sweep"]) }}

site/content/guide/notes.md

@@ -35,3 +35,9 @@ A new note has no file until you type something. The file is then named after it
 ## Limits
 
 A note holds up to **16 KB** while it is edited. A bigger text file opens read-only in the [Storage App](/guide/storage/); editing a file of any size is planned. In Storage, <kbd>e</kbd> on a text file opens it in the same editor, anywhere on the card, unless the file is read-only. Notes are never offered for deletion by the clean-up.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["notes", "notes-editor", "notes-name"]) }}

site/content/guide/settings.md

@@ -41,3 +41,9 @@ A network normally gives the device its address by itself (DHCP, **Automatic**).
 ### DNS and NTP
 
 Two DNS servers (9.9.9.9 and 1.1.1.1 by default), used on Fixed networks, or on every network if **Always use my DNS** is on; and two NTP servers (pool.ntp.org and time.cloudflare.com), used after any that the network's DHCP offers. <kbd>Enter</kbd> on **Status** shows what is in use and where each value came from.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["settings", "settings-choice", "wifi", "wifi-servers", "wifi-network", "wifi-status", "wifi-scan", "wifi-name", "debug-console"]) }}

site/content/guide/storage.md

@@ -45,3 +45,9 @@ The App says why when it refuses.
 At the top of the card, the last row, **Maintenance** (or <kbd>m</kbd>), shows the card's usage and holds **Storage clean-up** and **Erase SD card**. They delete for good, so they sit behind a warning. Clean-up deletes old logs and captures by category and age, showing the space it would free first. Notes and Saved Pages are never offered.
 
 The firmware warns once per start when the card passes **80%** full; past **90%**, logs stop being written so that the rest is kept for captures.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["storage", "storage-details", "storage-name", "storage-busy", "maintenance", "viewer-text", "viewer-hex", "viewer-pcap", "viewer-packet", "viewer-gpx", "viewer-ota"]) }}

site/content/guide/system.md

@@ -18,3 +18,9 @@ System changes nothing: it shows. It samples once a second and keeps its history
 ## Why it exists
 
 The device has about 107 KB of free memory and no PSRAM, so memory is the resource that decides what can run together: a secure connection takes about 52 KB at its peak. System makes that visible, and is how the project measures its own changes.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["system", "system-tasks", "system-system"]) }}

site/content/guide/updates.md

@@ -42,3 +42,9 @@ The connection to the project's server is checked against the two root certifica
 ## For developers
 
 Updates can also be pushed from a PC over Wi-Fi, with `scripts/flash.sh --ota <ip>`, or put on the card with `scripts/sd_put.sh`: see the [README](https://git.twis.la/twisla/roro9stack#firmware-updates-over-wi-fi-ota). The firmware's console can be reached over Wi-Fi too: see [The Debug Console](/dev/debug/).
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["firmware", "firmware-release", "firmware-older"]) }}

site/content/guide/wifi-tools.md

@@ -34,3 +34,9 @@ One bar for each of the 13 Wi-Fi channels shows how busy it is: how many network
 ## Signal tracker
 
 Follows one network: its name, address and channel, then the signal in dBm in large type, a strength bar, and a graph of the recent readings, so you can walk towards the strongest signal. <kbd>m</kbd> turns audible clicks on and off. If the network is no longer heard the screen says `lost`. <kbd>`</kbd> (Back) returns to the list.
+
+## The keys, as the device lists them
+
+What <kbd>Fn</kbd> + <kbd>h</kbd> shows on these screens. These tables are generated from the firmware's own lists, so they are always the current ones.
+
+{{ keys(scopes=["wifi-tools", "wifi-networks", "wifi-tracker"]) }}