LoRa Scanner: MeshCore by default, and its public channel read

The MeshCore preset is the default for a new device, in the Settings and
in the radio before the Scanner is opened. The setting now accepts it:
it only took the 7 Meshtastic presets, so MeshCore picked in the App was
not saved.

Messages on MeshCore's public channel are decrypted with the channel's
published key (AES-128, checked with 2 bytes of HMAC-SHA256): the row
shows who says they sent it and the start of the text, the details the
sender, the time and the whole text. Other channels and private messages
stay encrypted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0162FokPdvY2KsS4NBfwyWPk

README.md

@@ -138,7 +138,7 @@ On a page, `b` bookmarks it, `s` saves it to the SD card to read offline (a non-
 
 ## LoRa Scanner
 
-The LoRa Scanner (docs/milestones/M3.md) listens with the Cap's radio and **never transmits**. The Sniffer lists what it hears, newest first: time, RSSI, SNR, and for Meshtastic packets the sender and receiver (their last 4 hex digits) and hops; for MeshCore packets what they are (an advert with the node's name, a message with the first byte of each node's key, a channel message with the channel's byte) and the hops in their path. Enter shows a packet's details: what is never encrypted (the Meshtastic header; MeshCore's header, path and, in an advert, the node's name, kind, key and position) and a hex dump. `p` picks one of the 7 Meshtastic presets allowed in EU868 (LongFast by default) or **MeshCore** (its EU/UK Narrow setting: 869.618 MHz, 62.5 kHz, SF8, CR 4/8), `c` starts or stops a Capture: a pcap file with LoRaTap headers in `/captures/lora/`, for Wireshark. A Capture keeps recording with the App closed; otherwise the radio sleeps when the App isn't open. Tab switches to **Sweep**: the signal strength across 863–870 MHz in 100 kHz steps, as bars with peak hold and a waterfall, with the Sniffer's frequency marked; the Sniffer is paused meanwhile and picks up where it was. The GNSS receiver on the same Cap raises the radio's noise floor by 8 dB while it runs: Settings > "Pause GNSS for LoRa" (off by default) puts it in standby while the radio listens, except during a Track. The Status Bar shows `L` while the radio listens (bright for a moment on each packet), `SW` while sweeping, and `CAP` while capturing.
+The LoRa Scanner (docs/milestones/M3.md) listens with the Cap's radio and **never transmits**. The Sniffer lists what it hears, newest first: time, RSSI, SNR, and for Meshtastic packets the sender and receiver (their last 4 hex digits) and hops; for MeshCore packets what they are (an advert with the node's name, a message with the first byte of each node's key, a message on the public channel read, with the name its sender gives; any other channel message with the channel's byte) and the hops in their path. Enter shows a packet's details: what is never encrypted (the Meshtastic header; MeshCore's header, path and, in an advert, the node's name, kind, key and position; and a public channel message's sender, time and text, decrypted with the channel's published key) and a hex dump. `p` picks **MeshCore** (the default; its EU/UK Narrow setting: 869.618 MHz, 62.5 kHz, SF8, CR 4/8) or one of the 7 Meshtastic presets allowed in EU868, `c` starts or stops a Capture: a pcap file with LoRaTap headers in `/captures/lora/`, for Wireshark. A Capture keeps recording with the App closed; otherwise the radio sleeps when the App isn't open. Tab switches to **Sweep**: the signal strength across 863–870 MHz in 100 kHz steps, as bars with peak hold and a waterfall, with the Sniffer's frequency marked; the Sniffer is paused meanwhile and picks up where it was. The GNSS receiver on the same Cap raises the radio's noise floor by 8 dB while it runs: Settings > "Pause GNSS for LoRa" (off by default) puts it in standby while the radio listens, except during a Track. The Status Bar shows `L` while the radio listens (bright for a moment on each packet), `SW` while sweeping, and `CAP` while capturing.
 
 ## Storage