Settings: its rows in five groups

Settings had grown to 21 rows in one list. It opens on five groups (This
device, Display, GNSS and radio, Network, System); Enter opens one, Back
returns to the groups, and Back from the groups leaves Settings.

SettingsMenu holds the groups and which one is open (host-tested: every
setting is in exactly one group). The guide, the how-tos, the README,
the scripts' messages and the firmware's own name the new paths, such as
"Settings > System > Firmware".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0162FokPdvY2KsS4NBfwyWPk

site/content/dev/debug/commands.md

@@ -45,8 +45,8 @@ ifconfig | arp | netstat   the interfaces (Wi-Fi and the VPN), their addresses,
 uname   the firmware, its version and the chip it is built for
 scp [-f] [-P port] <file on the card> user@host:path | scp [-f] [-P port] user@host:path <file on the card>   one file over SSH, with this device's key or, in the Shell, a password, to a server the SSH App already trusts; -f replaces a file on the card; `cancel` stops it
 ssh user@host[:port] | ssh status | ssh stop   a terminal on another machine, in the SSH App; the password is asked there, never here
-vpn status | vpn up [seconds] | vpn down | vpn import [path] | vpn forget | vpn auto on|off   the WireGuard tunnel (Settings > VPN); import reads /vpn/wg0.conf; with seconds, it goes down by itself
-debug status | debug off [seconds]   the Debug Console over Wi-Fi (Settings > Debug Console); with seconds, it comes back
+vpn status | vpn up [seconds] | vpn down | vpn import [path] | vpn forget | vpn auto on|off   the WireGuard tunnel (Settings > Network > VPN); import reads /vpn/wg0.conf; with seconds, it goes down by itself
+debug status | debug off [seconds]   the Debug Console over Wi-Fi (Settings > System > Debug Console); with seconds, it comes back
 debug on | debug token <16 to 64 characters> | debug token new   (USB serial only) switch it on, set its token
 crash abort|wdt   crash on purpose (to test crash reports and Safe Mode)
 wifi ip ... try <seconds> | wifi ip keep   a trial IP setting: back to the previous one unless kept
@@ -97,7 +97,7 @@ In **Safe Mode** (see [Crashes and Safe Mode](/dev/debug/crashes/)) only a few r
 | `ls [folder]` / `du <path>` | Lists a folder of the SD card with sizes and dates, or counts the files and bytes under a path |
 | `screenshot [seconds]` | The screen as a PNG in `/screenshots` on the card, now or after a pause to get to the screen you want (240 x 135, about 33 KB). Over the Debug Console a bare `screenshot` sends the screen to the PC instead |
 | `cp [-f] <from> <to>` / `mv [-f] <from> <to>` / `rm [-r] [-f] <path>` / `mkdir <path>` / `cancel` | What the Storage App does, with its rules: copy (folders too), move or rename, delete (`rm -r` for a folder and what's in it, as Unix has it), new folder. `-f` replaces a file that's in the way; `*` and `?` in the last part of a path (`ls`, `du`, `rm`, `cp`, `mv`) run the command for each name matched, 64 at most; a tab separates paths that hold spaces; `cancel` stops a copy or a delete |
-| `install <path>` | Update from SD with that `.ota` file, as Settings → Firmware does |
+| `install <path>` | Update from SD with that `.ota` file, as Settings → System → Firmware does |
 | `update check` / `update list` / `update status` / `update install <tag>` | The project's releases on Gitea: look at the latest, list the last ten, say what's known, or download and install one |
 | `update pretend <version>` / `update probe <host>` / `update damage cut\|flip <n>` / `update daily` | Pretend to run another version (so a release counts as an update), see whether a server's certificate is accepted, cut or damage the next download, run the daily check again |
 | `lora probe` | Finds the radio: chip, oscillator, antenna switch, DIO1 interrupt, noise floor |